Calibrating From Twain - Visioneer Strobe 400 User Manual

103 V S
ISIONEER TROBE
C TWAIN
ALIBRATING FROM
You can access the calibration utility from the TWAIN interface. If you are using Windows Vista 64-bit,
or Windows 7 64-bit, and did not install OneTouch with your scanner, use these instructions for
calibrating the scanner.
1. Open the TWAIN interface.
2. Click on the scanner icon on the upper-right corner of the TWAIN interface.
3. The scanner's Device Settings options opens. Click on the Calibrate button.
400 S U ' G
CANNER SER S UIDE