GE 21 Owner's Manual And Installation Instructions page 14

Replacing the light bulbs.
Turning the control to the 0 [off) position does not remove power to the light circuit.
Refrigerator Lights (onsomemodels)
A CAUTION: Light bu)b moy
be hot.
O Unplug the refrigerator.
To remove the light shield, grasp the
shield at the back and pull out to release
the tabs at the back.
Rotate the shield down and then forward
to releasethe tabs at the front of the
shield.
After replacing with an appliance bulb of
the same or lower wattage, replace the
shield.
Plug the refrigerator back in.
NOTE'. A ppliance bulbs mag be ordered from
GE Parts and Accessories,800.626.2002.
LED Refrigerator Lights (onsomemodels)
An authorized technician will need to replace
the LEDlight.
Light
Shield
Appearance mayvary
Freezer Light
CAUTION:
Light bulbs may
be hot.
Unplug the refrigerator.
Removethe freezer basket for access.
The bulb is located at the rear of the
freezer inside a light shield.
To remove, grasp the shield at the top
and pull out to release the tabs at the
bottom.
After replacing with an appliance bulb of
the same or lower wattage, replace the
shield and freezer basket.
Plug the refrigerator back in.
14