Setting The Time And Date; To Stop Alarm - LENCO SCD-860 Instruction Manual

SETTING THE TIME AND DATE

1. Press the MENU/INFO button
Press the SELECT button to enter the system settings
2.
Turn the TUNING button backward or forward to enter
3.
Press the SELECT button to set
4.
Press the SELECT button again and then
5.
Turn the TUNING button backward or forward to
6.
Press the SELECT button to confirm it and then
7.
Turn the TUNING button backward or forward to
8.
Press the SELECT button to confirm it and then
9.
Turn the TUNING button backward or forward to
10.
Press the SELECT button to confirm it and then
11.
Turn the TUNING button backward or forward to
12.
Press the SELECT button to confirm it and then
13.
Turn the TUNING button backward or forward to
14.
Press the SELECT button to confirm it
15.
When the date is confirmed, "Time Saved" is displayed.
Then you can now use or and SELECT button to set followings:
- Auto update: Time update from Any or Digital Radio of FM or No Update.
- Set 12/24 hour: 12/24 hours clock display.
- Set Date Format: DD-MM-YYYY or MM-DD-YYYY.
- Note: When do the setting in the menu, press the MENU button to return back to previous step.
SETTING THE ALARM / THE ALARM MODE AND SNOOZE
1. Press the STANDY button and then long press the MENU/INFO button to enter Main Menu .
2. Press the SELECT button to enter System Settings mode.
3. Turn the TUNING button backward or forward to select Alarm mode. Press the SELECT button to confirm it.
4. Turn the TUNING button backward or forward to select Alarm 1. Press the SELECT button to confirm it.
5. Press the SELECT button to select" On mode.
6. Turn the TUNING button backward or forward to select " Wake Up time" mode. Press the SELECT to confirm it.
And then
the hour digit flash.
Turn the TUNING button backward or forward to
7.
and then
the minute digit flash.
Turn the TUNING button backward or forward to
9.
Press the SELECT button to confirm it.
10.The Wake Up Time is shown on the display.
Same procedure applies for Alarm 2 .
12.
13. Press the STANDY button again, 2 ALARM CLOCK
indicators and the alarm times are shown on the display.
SNOOZE ( REPEAT ALARM )
When the alarm sounds at the preset time, you can turn off the sounds
temporarily by pressing the STANDBY button.
Turn the VOLUME button backward or forward to enter " Snooze 10 minutes".
The Snooze indicators are blinking on the display and count the time backwards.

TO STOP ALARM

1. Press the STANDY button and then long press the MENU/INFO button to enter Main Menu .
2. Press the SELECT button to enter System Settings mode.
3. Turn the TUNING button backward or forward to select Alarm mode. Press the SELECT button to confirm it.
4. Turn the TUNING button backward or forward to select Alarm 1. Press the SELECT button to confirm it.
5. Press the SELECT button to select" Off mode. The alarm is cancelled and ALARM CLOCK OFF indicators
is shown on the display.
Same procedure applies for Alarm 2 .
6.
,
at standby mode will then enter the main menu.
Time/Date.
the
the date digit flash on the display.
adjust date digit.
the month digit flash.
adjust month digit.
the year digit flash.
adjust year digit.
the hour digit flash.
adjust hour digit.
the minute digit flash.
adjust minute digit.
, the correct time and date is shown on the display.
adjust hour digit.
adjust minute digit.
GB 3
.
Time/Date.
the
Press the SELECT button to confirm it
Off
I
Off
II