Visioneer OneTouch 8920 Installation Manual page 23

2. Find the appropriate mask for the item you're scanning. The masks
are in a protective plastic bag with your scanner.
Mask for 35mm slides.
3. To scan a 35mm slide, first position the 35mm mask on the glass.
The mask has one square corner. Align that corner with the arrow
on the scanner body.
Make sure that the text on the 35mm mask faces up so slide fits
properly in the mask.
Follow the directions on the mask and place the 35mm slide
horizontally into the slide holder.
Calibration slot
Notice that the mask has a narrow slot above the 35mm slide
holder. That slot is for calibration to assure that you get the best
possible scan results. Do not place items to be scanned in the
calibration slot.
S 35 S
CANNING MM LIDES AND
Mask for 35mm negatives.
19
N
EGATIVES