Table of Contents
Advertisement
2. Plug the USB cable into a USB port on the computer, keyboard, or
into a USB hub.
Note: If you have not installed the software, unplug the USB cable
from the computer and install the software now. When the software
installation is complete, a message tells you to connect the scanner.
Note: If you are using Windows XP and have plugged the USB cable
into a USB 1.1 port, an information bubble opens explaining that "A
HI-SPEED USB device is plugged into a non-HI-SPEED USB hub".
Plug the USB cable into a USB 2.0 port (if available) or disregard the
message. Refer to the Note on page 4 of this guide for more details.
Your computer recognizes that a scanner is plugged into the USB
port and loads the appropriate software to run the scanner.
3. Click Finish on the Connect Scanner window.
4. Click Finish on the InstallShield Wizard Completed window.
5. When installation is finished, restart your computer.
6. If you removed the CD from the CD drive and want to install
other software, reinsert the CD into the drive.
In addition to installing the other software from the CD, you can
also view and print the User Guides and Installation Guide.
S
4: C
USB C
TEP
ONNECT THE
13
ABLE
Advertisement
Table of Contents
