HP 82479A Owner's Manual page 231

Invalid Slot
Invalid Temp Units
Max Unit Number <x>
Missing Data Tag
Must Be On Same Card
No Digital Card
No Mux Card
No Room in Directory
No Room on Disk
No Setup
No Video Monitor
Nonexistent Group
Nonexistent Trace
Not A 4WO Pair
Not A Digital Card
Not A Monitor File
Not A Setup File
Not A Strip Chart File
[ot Acquisition Chnl
Not Enough Memory
Not HPAF File
Not MSDOS Disk
Referenced By nn
Error and Warning Messages
The slot specified for a digital byte function does not contain a digital
1/0 card.
The valid temperature units are C, F, K, and R.
Highest legal unit number for "Unit number?" prompt is <x>.
The HP-71 file to be transferred is not a STRIP, MONITOR, or LOG
data file.
A series of four wire ohms measurements can only span one card, for
instance from channels 3-8.
The HP 3421A does not contain a digital I/O assembly.
The HP 3421A does not contain a multiplexer assembly.
There is no space in the MS-DOS directory to add another file.
There is insufficient space on the target device to hold the file.
There is no current setup to edit or run.
The MONSET subprogram could not find a video interface.
The group number specified for editing does not exist in the current
setup.
The trace number specified for editing does not exist in the current
setup.
The specified channel in the HP 3421 A does not have a paired channel
for four wire ohms measurements.
The specified slot in the HP 3421A does not contain a digital I/O card.
The data file specified does not have the correct structure to be a strip
chart setup file.
The data file specified does not have the correct structure to be a setup
file for data logging.
The data file specified does not have the correct structure to be a strip
chart setup file.
The specified channel is either non-existent or is a digital I/O channel.
There is not enough available HP-71 memory to run the program.
The HP-71 file to be transferred is not an HPAF-formatfile.
The target device contains a non-MS-DOS disc.
The specified group cannot be deleted because it is referenced by a limit
action in another group.