Servicing - Zanussi Z9282T Instructions For The Use And Care

Servicing
Should servicing be required for this
appliance contact your local Service
Agent but before requesting service the
following simple checks may save you
inconvenience and expenses:
The machine won't start
Check that:
the plug is firmly in the wall socket and
that there is an electricity supply by
plugging in another appliance;
the door of the machine is firmly closed;
the required programme is correctly
selected;
the program control knob is actually
pulled out;
make sure the fuses of your electrical
installation have not blown.
The machine won't fill
Check that:
the water tap is actually turned on and
that there is sufficient pressure;
the fill hoses are not bent or kinked in
such a way to prevent normal water flow;
the filter in the fill valve is not clogged
by foreign matter.
The machine fills, but the water
empties from the drain hose
Check that:
the end of the drain hose is not placed
too low from floor level.
The machine won't drain or spin
Check that:
the drain hose is not sharply bent
(kinked) or placed in such a way as to
obstruct a normal water flow;
the drain filter is not clogged.
The machine vibrates or is too noisy
Check that:
the inner packing (transit security) was
correctly removed, as described in
paragraph «Unpacking»;
the machine is correctly levelled as
described in the relevant paragraph;
the washer is not too close to a wall or
to the furniture.
17