Advertisement
PREPARATION
BEFORE USE OF IK-1850
Installing the viewfinder
There are mounting screws both side of the camera and
the viewfinder respectively, so you can use either one at
your convenience.
If your best eye is your right eye,
put the attachment
plate to the right side of the view-
finder facing to the eye-hood cap of the viewfinder by
the
screw, and put the attachement
plate to the right
side panel of the camera
by putting the viewfinder In
upright position
for the
attachment
plate, as shown
below, then tighten the screw.
How to set the handgrip
Push the handgrip fock-button, and push over the end of
the handgrip until a click is heard.
How to attach the camera to the tripod
Push the handgrip lock-button, and push it back until a
click is heard.
Then
the screw for the tripod will come
out, as shown in the figure.
7,aosnma,
js
HOD
om
Gy
R
For the
left eye, use the opposite
side-screws
for
the above respectively.
Then, insert the viewfinder
plug into the VF jack
on the camera.
|
Advertisement
