Advertisement
Use of the Camera
in Combination
with the Portable
2. Load
a cassette
into
the
VCR,
and depress
the
VCR (V-5530).
RECORD
button.
The picture taken by the camera
1. Place the POWER
switch on the camera in the ON
will appear on the screen of the TV if everything is
position.
If a TV is available, also turn it on.
OK.
mr
How to connect to the TOSHIBA Portable VCR V-5530
3. Turn"'COLOR
ADJUST" as appropriate.
5. The VCR
can be stopped any time by depressing the
When
the knob is in the center, it indicates 3000°K
VCR
remote control switch on the camera.
Depress
with the color temperature switch at 0: / 4% position
it again to start the VCR
recording again. The hand-
or 6000°K with the switch at the <t position,
grip also provides VCR remote control switch, so you
can choose either one at your convenience.
Rass
oe"
o
'EN
©
ae
Rear panel of the camera
4. After adjusting the camera to obtain optimum picture
quality,
depress
the
RECORD
and
PLAY
buttons
simultaneously.
The
VCR
now
begins
recording.
VCR
Remote Control Switch
CAUTION
Do
not keep the VCR
out of operation
(in the pause
mode) for more than 5 minutes by depressing the VCR
remote control switch on the camera.
When
the VCR
will be out of operation
(in the pause
mode)
for longer than 5 minutes, depress
the STOP
button on the VCR.
If the acoustic feedback
(whistle-like
sound) come
out
from
the TV
speaker, then
keep the
camera
or micro-
phone away
from the TV or turn down
the vojume
at
the TV.
240%
Advertisement
