Table of Contents
Advertisement
Watching PIP/double-window
The PIP/double-window
feature allows you to watch two pictures at
the same time. The sub-picture can be a TV broadcast or come from
an external source, such as a VCR.
To display a TV broadcast as a sub-picture:
1. Turn on the TV and select the program you want to watch.
2. Press PIP once to display a small picture. A window 119 the size
of the screen will appear. Press PIP a second time to display a
double-window.
Main window
Sub-window
PiP mode
Double-window mode
3. Press PIP CH • • to choose the program you want to be
displayed as a sub-picture.
If the V-CHIP feature is active and you try to watch a TV
program that exceeds the rating limits you set, the TV will enter
into the program block mode. See "Using V-CHIP menu" on
page 35.
Example:
PIP mode
To display a picture from an external source as a sub-picture:
1. Make sure you have connected the external source equipment
properly. For more information, see the "Connecting
your TV"
on page 5.
2. Turn on the TV and select the program you want to watch.
3. Press PIP once to display a small picture. A window 1/9 the size
of the screen will appear. Press PIP a second time to display a
double-window.
.
Press SOURCE repeatedly to select the input source (VIDEO 1,
VIDEO 2 or VIDEO 3) for the sub-picture. The selected source
will be displayed in purple. ColorStream HD1 and HD2 can not
be selected.
Note:
PIP
PIP CH AT
• PIP/double-window can not be turned on
when the ColorStream input (HD 1 or
HD2) is being viewed.
• Youcan not displaythe signal sources input
through the ANT-2 terminal as a sub-
picture.
To turn PIP off:
Press PIP once or twice, depending on the size of the sub-picture
screen you selected.
31
Advertisement
Table of Contents
