Yamaha RX-V2400 Owner's Manual page 18

_ @00N RX-V240(IU EN.book Page 14 Thursday, July 3, 2003
11:2(IAM
• FRONT terminals
Connect one or two speaker syslems to these terminals, If
you use only one speaker syslem, connect it Io either of
the FRONT A or B lerminals.
• CENTER terminals
Connect a center speaker to these terminals.
• SURROUND terminals
Connect surround speakers to these terminals.
+
The Canada model cannot output to two separate speaker systems
simuhaneously.
Bi-wired connection
The unit also allows you to make bi-wired connections to
one speaker syslem. Use two pairs of speaker cables for
each speaker (one pair fi_r the woofer and one pair fin"the tweeter/
mid-range). To use the bi-wired connections, press SPEAKERS
A and SPEAKERS B on the front panel so that both SPA and
B light up on the front panel display.
Bi-wired connection
V
This unit
• SUBWOOFER jack
Connect a subwoofer wilh buill=in amplifier, such as the
YAMAHA Active Servo Processing Subwoofer System,
to this jack.
• SURROUND BACK terminals
Connect surround back speakers to these terminals. If you
only connect one surround back speaker, connect it Io Ihe
left (L) terminals.
• PRESENCE terminals
Connect presence speakers to these terminals.
* If you are using either U.S.A., Canada or Australia model, you
can also use these speakers as 7mne 2 speakers (see page 57).
+
14