Jabra Pro 9460 Duo How Do
Hide thumbs
Also See for Pro 9460 Duo:
- Quick start manual (8 pages) ,
- How to connect (4 pages) ,
- Quick start quide (4 pages)
Advertisement
Quick Links
Jabra Pro 9460 Duo
How do I connect my Jabra Pro 9400 / Go 6400 with Aastra
6753i, 6755i, 6757i?
Requirements:
Jabra Link 14201-10
DHSG connection cable from Aastra
Aastra 53i / 55i / 57i / 57iCT / 6753i / 6755i / 6757i / 6757iCT phone with
firmware 2.5.1.2000 or later.
To connect your headset to your phone follow these steps:
1. Plug the RJ10 connector (green) from the split end of the Aastra
DHSG cord into the headset socket.
2. Plug the RJ45 connector (yellow) from the split end of the Aastra
DHSG cord into the socket for the expansion module.
3. Plug the single end of the Aastra DHSG cord (blue) in the RJ45
adapter.
4. Plug the single end of the Jabra Link 14201-10 cable (blue) into the
free socket on the RJ45 adapter.
https://www.emea.jabra.com/supportpages/jabra-pro-9460/9460-29-707-
101/faq/4b3cba38-ca36-4410-8a36-3e1fbff5b658
11/02/2024 07:03
Page 1 of 4
Advertisement
Related Manuals for Jabra Pro 9460 Duo
Summary of Contents for Jabra Pro 9460 Duo
- Page 1 DHSG cord into the socket for the expansion module. 3. Plug the single end of the Aastra DHSG cord (blue) in the RJ45 adapter. 4. Plug the single end of the Jabra Link 14201-10 cable (blue) into the free socket on the RJ45 adapter. https://www.emea.jabra.com/supportpages/jabra-pro-9460/9460-29-707-...
- Page 2 11/02/2024 07:03 5. Connect the split end of the DHSG cable to the Jabra device base as follows: a. Plug the RJ10 connector into the socket with the complete “phone” symbol. b. Plug the RJ45 connector into the socket marked “AUX”.
- Page 3 11/02/2024 07:03 c. Select Manual. d. Select adapter type DHSG. 7. Set the phone setup switch to position A. https://www.emea.jabra.com/supportpages/jabra-pro-9460/9460-29-707- Page 3 of 4 101/faq/4b3cba38-ca36-4410-8a36-3e1fbff5b658...
- Page 4 11/02/2024 07:03 8. We recommend setting the microphone volume to 7 out of 13. As part of the installation, you can dial into your local Jabra Setup server which will configure the audio path. Follow the instructions shown on the display. If your Jabra setup server is unavailable, contact your local Jabra Support team.