Page 1
11/02/2024 07:02 Jabra Pro 9460 Mono How do I connect my Jabra Pro 9400 / Go 6400 with Aastra 6753i, 6755i, 6757i? Requirements: Jabra Link 14201-10 DHSG connection cable from Aastra Aastra 53i / 55i / 57i / 57iCT / 6753i / 6755i / 6757i / 6757iCT phone with firmware 2.5.1.2000 or later.
Page 2
11/02/2024 07:02 5. Connect the split end of the DHSG cable to the Jabra device base as follows: a. Plug the RJ10 connector into the socket with the complete “phone” symbol. b. Plug the RJ45 connector into the socket marked “AUX”.
Page 3
11/02/2024 07:02 c. Select Manual. d. Select adapter type DHSG. 7. Set the phone setup switch to position A. https://www.apac.jabra.com/supportpages/jabra-pro-9460/9460-25-707- Page 3 of 4 102/faq/4b3cba38-ca36-4410-8a36-3e1fbff5b658...
Page 4
11/02/2024 07:02 8. We recommend setting the microphone volume to 7 out of 13. As part of the installation, you can dial into your local Jabra Setup server which will configure the audio path. Follow the instructions shown on the display. If your Jabra setup server is unavailable, contact your local Jabra Support team.