Daewoo D50DM54UAMS Instruction Manual page 31

Channel Skip:
switching the channels via Programme +/- buttons
on the remote. Highlight the desired channel/s on the
OK to select/unselect.
Channel Swap:
selected channels in the channel list. Highlight the
OK to select.
Yellow button
and enter the number of the channel you want to select.
Then highlight OK OK to go to that channel.
You may need to set the LCN in order to
enable this feature.
Channel Move:
another channel. Highlight the channel you want to
OK to select. Then do the same for a
Blue
Yellow button and enter the number
of the channel you want to select. Then highlight OK
OK to go to that channel. You may need to
set the LCN in order to enable this feature.
Channel Edit: Edit channels in the channel list. Edit
Network
Name Channel Type and Frequency information
or the Yellow button to edit the highlighted channel.
Blue button to delete the highlighted
channel.
Channel Delete: Highlight the desired channel/s on
OK or the Yellow button to select/
Blue button to delete the
selected channel/s.
Clear Channel List: Delete all channels stored in the
tion. Highlight OK OK
Highlight Cancel OK to cancel.
Input Source - Cable
Channel Scan: Start a scan for digital cable channels.
OK. Scan Mode Frequency
and Network ID
Mode selections. Set the Scan Mode as Full if you
OK or the Right directional button to start
Back/Return button to
cancel the scan. The channels that have already been
found will be stored in the channel list.
Single RF Scan: Enter the Frequency value. Signal
Level and Signal Quality of the selected Frequency
will be shown. Highlight the Scan
or the Right directional button to start scan. The found
channels will be stored in the channel list.
LCN:
Channel Number system that organises available
broadcasts in accordance with a recognisable channel
Channel Scan Type:
Channel Store Type:
Favourite Network Select: Select your favourite net-
network is available.
selected country during the initial
Channel Skip:
switching the channels via Programme +/- buttons
on the remote. Highlight the desired channel/s on the
OK to select/unselect.
Channel Swap:
selected channels in the channel list. Highlight the
and enter the number of the channel you want to select.
Then highlight OK OK to go to that channel.
You may need to set the LCN
enable this feature.
OK
Channel Move:
another channel. Highlight the channel you want to
OK to select. Then do the same for a
Blue
Yellow button and enter the number
of the channel you want to select. Then highlight OK
OK to go to that channel. You may need to
set the LCN in order to enable this feature.
-
Channel Edit: Edit channels in the channel list. Edit
Name Channel Type Frequency Modulation and
Symbol Rate information related to that channel.
editable. Press OK or the Yellow button to edit the
to delete the highlighted channel.
Scan
Channel Delete: Highlight the desired channel/s on
OK or the Yellow button to select/
Scan
Blue button to delete the
selected channel/s.
Clear Channel List: Delete all channels stored in the
tion. Highlight OK OK
Highlight Cancel OK to cancel.
OK Input Source - Satellite
English - 15 -
Satellite Re-scan: Start a satellite scan beginning
with the antenna selection screen. When this scanning
For the General Satellite channel installation mode
SatcoDX Scan
On
OK
to return to the satellite selection screen. Highlight Next
OK
list installation. If the selected satellite is not correct
OK to select.
selected will be listed. Press OK to close the dialogue
Back/Return to return to satellite selection
Yellow button
screen. Then set the satellite accordingly.
Satellite Add:
in order to
Installation Mode is set to General Satellite.
Satellite Update:
Channel Installation Mode is set to Preferred Satel-
lite
OK
Then the Back/Return button to return to the
satellite selection screen. Highlight Next
OK
Satellite Manual Tuning: Start a manual satellite scan.
Network
OK
Favourite Network Select: Select your favourite net-
Blue button network is available.
Channel Skip:
switching the channels via Programme +/- buttons
on the remote. Highlight the desired channel/s on the
OK to select/unselect.
- Channel Swap:
selected channels in the channel list. Highlight the
and enter the number of the channel you want to select.
Then highlight OK
Channel Move:
another channel. Highlight the channel you want to
OK. Download SatcoDX
OK to continue. Select the sdx of the channel you want to select. Then highlight OK
OK. Satellite selection screen will
Channel Edit: Edit channels in the channel list. Edit
the name and channel number of the selected channel
quency information related to that channel if available.
the Back/Return button
editable. Press OK or the Yellow button to edit the
to delete the highlighted channel.
Channel Delete: Highlight the desired channel/s on
selected channel/s.
Clear Channel List: Delete all channels stored in the
Channel
tion. Highlight OK
Highlight Cancel
Note: Some options may not be available and appear as
You will also
greyed out depending on the operator selection and operator
If
related settings.
Channel Installation Mode
Satellite
be selected accordingly. Set to Preferred Satellite
OK
highlight Next and
a normal installation.
Auto Channel Update
selected country during the initial
Channel Update Message
Parental Controls
changed the PIN after the initial setup use that PIN. If you didn't
set a PIN during the initial setup, you can use the default PIN.
The default PIN is 1234. Some options may not be available or
OK to select.
vary depending on the country selection during the initial setup.
The content of this menu may not be displayed if the channel
installation is not completed and no channels are installed.
English - 16 -
Yellow button
OK to go to that channel.
OK to select. Then do the same for a
Blue
Yellow button and enter the number
OK to go to that channel.
Network Name Channel Type and Fre-
Blue button
OK or the Yellow button to select/
Blue button to delete the
-
OK
OK to cancel.
Preferred Satellite or General
General Satellite to