Advertisement
"5/4" position: An answer is rounded off.
"" position:
An answer is rounded down.
EXAMPLE:
10.005 + 5 = 2.001
Set decimal to 2, T
10.005 [=] 5
> 2-01 *
Set decimal to 2, 5/4
10.005
[+] 5
— 2:00 *
Note:
The decimal point floats during successive calculation by the use
of [x] or [#].
In floating decimal point system, an answer is rounded down.
Os mas
DECIMAL SELECTOR:
Presets the number of decimal places in the answer.
In the "F" position, the answer is displayed in the floating decimal
system.
GRAND TOTAL MODE SELECTOR:
"GT" position:
This selector will accumulate the following:
The symbol! " * +" will be printed.
1. Addition and subtraction totals obtained with
[C&4| .
2. Product and quotient totals obtained with
[2]
or
[==] .
3. Answers obtained with
or [MU] .
"e" position:
Neutral, GT OFF
PAPER FEED KEY
RIGHT SHIFT KEY:
Operation of this key in entered numbers or calculated results shifts the
number one digit to the right together with the decimal point. Used for one
digit correction.
GRAND TOTAL KEY:
Prints and clear the "GT" memory contents.
NON-ADD/SUBTOTAL KEY:
Non-Add — When this key is pressed right after an entry of a number in
the Print mode, the entry is printed on the left-hand side with
the symbol "#".
This key is used to print out numbers not subjects to calculation
such as code, date, etc.
Subtotal —
Used to get subtotal(s) of additions and/or subtractions. When
pressed following
[=] or [==],
the subtotal is printed with
the symbol "0" and the calculation may be continued.
Advertisement
