Advertisement
You can use setup files to reproduce a particular
configuration of settings. You can also revise the
contents of setup files.
There are eight types of setup files, of which five are
'factory preset setup files and the other three are user
files.
This describes how to call up a setup file and use it to
replace the current menu settings.
1 Set the SET UP switch to FILE.
SET UP switch
The camera head is set according to the currently-
selected file data.
2 Access basic menu page 3.
FILE: (XFL)
SSELECT FILE
(FL)
elected file
HG FILE
(YES3A)
a,
a)An asterisk (*) appears in front of any factory
preset file whose contents have been revised at
least once.
:
urrent file ®
3 Move the.cursor to SELECT FILE and use the UP/
ON button or the DOWN/OFF
desired file.
Press the UP/ON button or DOWN/OFF button
repeatedly until the desired file name is displayed.
(YES?A)
STD
HI SAT
FILMLIKE
SVHS/VHS
USER1 to USER3
FILE:
*FL
SELECT
FILE
FILMLIKE
CHG
FILE
4 Move the cursor to CHG FILE and press the UP/
ON button.
File
Description
Settings for shooting under
standard conditions
Settings for making pictures
vivid
Settings for shooting under —
fluorescent lighting
Settings for making pictures like
ones shot by film camera
Settings to optimize camera
image for recording and
playback characteristics of S-
VHS, VHS, or Hi-8 tape ~
User setup files (set to STD at
shipping)
The display changes as shown below and the
selected file is called up.
You can also call up these files via a similar operation
FILE:
xFL
SELECT
FILE
FILMLIKE
9CHG
FILE
in advanced menu page 10. In this page, a file
recorded onto a tape can also be called up (when using
the DSR-1/1P).
For details, see "To call up files recorded onto a tape (when
using the DSR-1/IP)" (page
Chapter 4 Viewfinder Screen Indications and Menus
72).
button to select the
71
ii | |
snusy
pue
SUOHeOIpU]
USEl0S
JepuyMalA
7 se}deug
Advertisement
