Advertisement
suonoeuuog
pue Gums zserdeyo
||ll||/INIIIIIIII
This unit operates on either a battery pack or an AC
_ -
supply (using the optional CMA-8A/8ACE AC
Adaptor).
For details of the power supplies which can be used, refer to
the documentation supplied with the VTR connected to this
unit or the camera adaptor.
Using an Anton Bauer Intelligent Battery
_ System and Ultralight System
Fitting the special battery mount made by Anton Bauer
Corporation to this unit allows you to use their
Intelligent Battery System and Ultralight System.
For details, consult your Anton Bauer products supplier or
Sony dealer.
Always fully charge a battery pack before using it.
¢ Be careful that other metal objects do not come in
contact with the metal parts of the battery pack, as
this could cause a short.
¢ Do not leave the battery pack in the camera if it is not
going to be used for a long time.
¢If the battery pack is recharged after use while still
hot, it may not be possible to obtain a full charge.
Fitting a battery pack (NP-1B)
Open the lid of the battery case, insert a fully-charged
battery pack, and close the lid.
:
40
Chapter 2 Fitting and Connections
Battery pack operating times
The following table shows approximate continuous
operating times, when operating the camera and 1.5-
inch viewfinder at normal temperatures, with a camera
adaptor and an DSR-1/1P or PVV-3/3P connected.
Approximate operating times with
a fully-charged battery pack
DXC-D35/D35P
Battery pack | With camera | With DSR-1/ | With PVV-3/
adaptor
1P
3P
NPB
__|170 minutes
NIA
BP-90A®
|
= —
[130 minutes | 140 minutes
DXC-35WSL/D35WSPL
adaptor
PVV-3/3P
NP-1B
95 minutes
50 minutes
epson
«(to minutes
a) Requires the special-purpose DC-500 Battery Case.
Cannot be used with a camera adaptor.
With DSR-1/1P or
Battery low indications
When the voltage of the supply to the camera head
lowers to or below 11.0 V, the battery voltage
indication appears in the viewfinder. At this time, the
BATT indicator in the viewfinder flashes when
operating with the DSR-1/1P or PVV-3/3P.
If you continue using the camera head, the BATT
indicator lights up.
When the battery pack is low, replace it with a fully-
charged battery pack.
Advertisement
