Daikin RXYMQ5BVM Operation Manual page 8

READ BEFORE OPERATION
Names of parts
„ Remote Controller
NOTE :
This manual describe only for BRC1E62.
For other remote controllers, please see the operation manuals attached to them.
Mode Selector button
1
Use to select the operation mode of your preference.
(Refer to page 7 - 9.)
* Available modes vary with the connecting model.
Airflow Setting button
Used to indicate the Airflow Rate (Airflow level/Fan Speed)/
2
Airflow Direction screen. (Refer to page 10.)
* Available fan speed and airflow direction vary with the
connecting model.
Menu/Enter button
3
• Used to indicate the Main Menu.
• Used to enter the setting item selected.
Up button " "
• Used to raise the set temperature.
• Use to highlight the item above the current selection.
4
(The highlighted items will be scrolled continuously when the
button is kept pressed.)
• Used to change the item selected.
* Be sure to press the part with the symbol "
Down button "
• Used to lower the set temperature.
• Use to highlight the item below the current selection.
5
(The highlighted items will be scrolled continuously when the
button is kept pressed.)
• Used to change the item selected.
* Be sure to press the part with the symbol "
5
11
1
2
"
"
"
BRC1E62
Right button "
6
• Used to highlight the next items on the right-hand side.
• Display contents are changed to next screen per page.
* Be sure to press the part with the symbol "
Left button "
7
• Used to highlight the next items on the left-hand side.
• Display contents are changed to previous screen per page.
* Be sure to press the part with the symbol "
ON/OFF button
8
• Press this button and system will start.
• Press this button again and system will stop.
Operation lamp (Green)
9
• This lamp lights up during operation.
• This lamp blinks if a malfunction occurs.
Cancel button
10
Used to return to the previous screen.
LCD (with backlight)
• The backlight will be lit for approximately 30 seconds by
11
pressing any operation button. Press the button while the
backlight is lit. (Excluding the ON/OFF button)
• If 2 remote controllers are used to control a single indoor unit,
the backlight of the remote controller accessed first will be lit.
4, 5, 6, 7
9
8
3
10
"
"
"
"