Safety Instructions; Application And Specifications - Hama 00 220844 Operating Instructions Manual

4. Safety instructions

Warning
• Given the multitude of terminal devices and wall structures available on the market, the supplied mounting
kit is unable to cover every option.
• It occasionally happens that the screws for attaching the device to the bracket are too long.
• Please note that the supplied wall plugs are for use with solid, hollow and board construction materials
only.
• Read the operating instructions for your terminal device before attempting to mount it. The instructions
provide information about the type and measurements of suitable fastening materials.
• If the supplied mounting kit does not contain suitable fastening materials for mounting the terminal device,
purchase these from a specialised dealer.
• Never apply force during assembly. This can damage your device or the holder.
• If in doubt, have this product installed by a qualified technician - do not attempt to install it yourself!
• Do not mount the product above locations where persons might sit or stand.
• Once you have mounted the product and the attached load, check that they are sufficiently secure and safe
to use.
• You should repeat this check at regular intervals (at least every three months).
• Ensure that the product does not exceed its maximum permitted carrying capacity and that no load exceeding
the maximum permitted dimensions is attached.
• Make sure that the product is loaded symmetrically.
• Maintain the necessary safety clearance around the attached load (depending on the model).
• In the event of damage to the product, remove the attached load and stop using the product.
• Do not attach any additional objects to the product.

5. Application and specifications

• The bracket is used for mounting flat screens in private, non-commercial households.
• The bracket is intended only for use inside buildings.
• Use the bracket only for the intended purpose.