Table of Contents
Advertisement
7. Adjustment & maintenance
Note
Never adjust the bracket alone. Seek assistance and help!
Note - tiltable / full-motion brackets
• Ensure that no electrical cables are crushed or damaged during installation or adjustment.
• During adjustment, ensure that the product is loaded symmetrically and that the maximum permitted carrying
capacity is not exceeded.
• Check the strength and operational safety of the bracket and the load attached to it at regular intervals (at
least quarterly).
• Clean only with water or conventional household cleaners.
8. Setting options
-12°/+5°
Tilting
• To adjust the tilt angle, open the fastening screws at the side, set the required tilt, and then secure the screws
in place again.
Advertisement
Table of Contents
