Using The Metronome - Korg MPS-10 Quick Start Manual

MPS-10
- Playing the MPS-10
Top page
The page that's shown on the display when you turn on the power is called the "top page".
KIT number
KIT name
Looper track status indicator
The KIT number and name, CC pad, looper status and so on are shown on the top page. You can use the KIT +
and − buttons as well as the VALUE knob to switch between KITs. You can also use the pads or a footswitch to
change the KITs.
Selecting a KIT
Press the KIT + and − buttons to switch between the KITs
before and after the current KIT.
When you select KITs in order, this lets you quickly switch
between them when you're performing.
You can also use the VALUE knob to select a KIT number.
See the Owner's Manual (HTML) for details.

Using the metronome

The MPS-10 features a metronome, which acts as a guide to help you keep the tempo.
The metronome starts and stops with each press of the METRONOME knob.
The LED lights up red along with the beat of the metronome.
Turn the METRONOME knob to adjust the tempo. You can set the time signa-
ture, metronome sound and volume in UTILITY mode.
See the Owner's Manual (HTML) for details.
Current position of CC pad
KIT BPM
Loop length for sync settings track
when recording
Looper volume
Looper BPM
Loop length
On/Off
En-9
Tempo Up/Down