Wiring Diagram - Viking Designer DGRT3004BSS Install Manual

WIRING DIAGRAM

GAS RANGETOPS
For connection to the factory installed terminal block, use copper or aluminum conductors.
WARNING
ELECTRICAL GROUNDING INSTRUCTIONS
Th is appliance is equipped with a three-prong grounding plug for your protection against shock hazard and should be
plugged directly into a properly grounded three-prong receptacle. Do not cut or remove the grounding prong from thid
CAUTION
Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous
operation. Verify proper operation after servicing.
REFER ONLY TO FEATURES WHICH ARE EQUIPPED WITH THIS UNIT.
13 14