Advertisement
Control Locators
LOCATION OF PARTS
1. SPEAKER
2. TUNER DIAL
3. TUNING KNOB
4. AM/FM BAND SWITCH
5. ON - OFF SWITCH/VOLUME CONTROL
6. A/C POWER CORD
7. FM ANTENNA
4
1
2
3
4
5
7
6
Getting Started
Power Source
1
Unwind the A/C POWER CORD (6) at the back
of the unit and connect it to a power outlet.
2
Plug A/C cord into appropriate outlet.
AC
Polarized Plug
3
This product is equipped with a polarized
alternating current line plug (a plug having one
blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety
feature, If you are unable to insert the plug fully
into the outlet, try reversing the plug. If the plug
should still fail to fit, contact you electrician to
replace your obsolete outlet. Do not defeat the
purpose of the polarized plug.
4
Untie the FM ANTENNA (7) and allow it to hang
in a straight line.
Basic Operation
Radio Operation
1
Turn the unit ON by turning the ON-OFF
SWITCH/VOLUME CONTROL (5) clockwise to
the ON position.
2
Select the desired waveband by turning the BAND
selector (6) to either the AM or FM position.
3
Turn the TUNING KNOB (3) to select the desired
station on the Tuner Dial (2).
4
Adjust the volume to the desired listening level by
turning the ON-OFF SWITCH/VOLUME
CONTROL(5).
5
Turn the unit off by turning the ON-OFF
SWITCH/VOLUME CONTROL (5) counterclockwise
to the off position.
EXTERNAL ANTENNA
The unit is provided with a wire antenna for FM
reception. Move the wire until the reception is
clear. Do not connect the FM antenna to any
external antenna. Am reception would be improved
by relocating the unit.
5
Advertisement
