Miller Maxtron 450 Owner's Manual page 29

3-7. Remote 17 Receptacle Information
()~
OUTPUT
(cONT~TOR)
D Contactor on/off signal; +13 to +24 volts dc contactor on, 0 volts
dc contactor off.
REMOTE OUTPUT
CONTROL
A +10 volts dc
output
to remote control;
allows full control of MI
output
from
remote
control.
B 0 to +10 volts dc input command signal from remote control.
H
+24 volts dc; fused at 1
ampere.
K
0 to +10 volts dc
output
to remote control set by panel AN
con
trol; allows percent
of
panel
AN control from
remote control.
L 24 volts dc;
fused
at 1
ampere.
E/t~.
Cvicc
C CVICC select; +13 to +24 volts dc selects CV, 0 volts dc selects
CC.
G Dig/inductance control; 0 to +10 volts dc set by panel Dig/
Inductance control.
A ~
AMPERAGE
~ ~
VOLTAGE
E
Current feedback; +1 volt dc per 100
amperes.
M Voltage feedback; +1 volt dc per 10
arc
volts.
The
remaining
sockets
are
not
used.
REMOTE 17
Socket*
Socket Information
Ret. ST-Boo
764
GND
F
P
Circuit
common
for sockets
A, B, D, E, K,
and M.
S
Circuit
common
for sockets H and L.
3-8. 115 Volt AC Receptacle
Chassis
common.
OM-167
302 Page 11