Table of Contents
Advertisement
Follow the instructions of the
2.
Home Connect app.
16.2 Remote Start
You can start the device with your
mobile device via the Home Connect
app.
Tip:If you are in the Basic settings
→ Page 39
of this function "rc2"
settings, the function is permanently
activated and you can start the device
at any time with a mobile device.
Activate Remote Start
If you set "rc1" in the basic settings of
this function have set, activate the
function on your device.
Requirements
¡The device is connected to the WLAN
home network connected.
¡The device is connected to the Home Con-
nect app connected.
¡In the Basic Settings
→ Page 39
of this function is "rc1"
set.
¡A program has been selected.
▶
impressions.
When you open the appliance door, the
function is automatically deactivated.
aButton is illuminated.
Tip:To deactivate the function press
to press.
16.3 Protection of personal
data
Please observe the instructions
regarding the protection of personal
data.
When your device is connected to a
home network connected to the
Internet for the first time, it displays
the following
data categories to the Home
Connect server (first registration):
¡Unique identification of the device
ready (consisting of device keys
and the MAC address of the built-
in
Wi-Fi communication module). ¡Wi-
Fi security certificate
communication module (for the
information technology security of
the connection).
¡The current software and hardware
version of your home appliance.
Status of any previous one
reset to factory settings.
The first registration prepares the use
of the Home Connect functionalities.
This registration should only be
carried out when you want to use the
Home Connect functionalities for the
first time.
Remark:Please note that the Home
Connect functionalities can only be
used in combination with the Home
Connect app. Information about data
protection can be called up in the
Home Connect app.
Home Connect
¡
41
Advertisement
Table of Contents
