Table of Contents
Advertisement
Final rinse system
11 Final rinse system
11.1 Rinse aid
For optimal drying results, use the
best rinse aid.
Only use rinse aid for household
dishwashers.
Fill rinse aid
If the rinse aid refill indicator lights up,
refill rinse aid. Only use rinse aid for
household dishwashers.
Press and lift the lip on the rinse aid
1.
reservoir lid.
Top up the rinse aid up to the max
2.
mark.
If rinse aid is running,
3.
it must be removed
from the holder
28
2
1
max
part is left
the rinse aid
wider.
Overflowed rinse aid can lead to
excessive foaming during the wash
cycle.
Close the lid of the rinse aid
4.
reservoir.
aThe lid clicks into place audibly.
11.2 Adjusting the amount of
rinse aid
If streaks or water spots remain on the
dishes, adjust the amount of rinse aid.
Press.
1.
Approx. 3 seconds on
2.
to open the basic settings.
aThe display shows Hxx. aThe
display shows
to give.
Just as often
3.
until the display shows the
factory-set value r05.
Just as often
4.
the desired amount of rinse aid is
set.
– At a low setting, less rinse aid is
added during the washing cycle,
which reduces streaks on the
dishes.
– At a higher setting, more rinse
aid is added during the washing
cycle, which reduces water
spots and improves drying
results.
To save the settings, press for
5.
approx. 3 seconds
11.3 Switch off the rinse
system
If the rinse aid refill indicator bothers
you, e.g. if you use a combined
detergent with rinse aid
Busy-
display
to press
press until
to press.
Advertisement
Table of Contents
