Toyota Dyna100 EE 2012 Manual page 231

MANUAL TRANSMISSION
Oil capacity, L (qt., Imp. qt.):
*
Dyna 100
*
Dyna 150
Oil type:
Gear oil API GL−4 or GL−5
Recommended oil viscosity:
SAE 75W−90
*
: See "Model code" on page vi in the
beginning of this manual if you are not
sure of your vehicle model.
DIFFERENTIAL
Oil capacity, L (qt., Imp. qt.):
*
Dyna 100 2.30 (2.43, 2.02)
*
Dyna 150 3.45 (3.65, 3.04)
Your Toyota vehicle is filled with "Toyota
Genuine Differential Gear Oil" at the
factory. Toyota recommends the use of
approved "Toyota Genuine Motor Oil".
Another motor oil of matching quality can
also be used.
Oil type:
Standard differential
Hypoid gear oil API GL−5
Limited slip differential
Hypoid gear oil LSD API GL−5
Recommended oil viscosity:
Above −18_C (0_F)
SAE 90
Below −18_C (0_F)
SAE 80W or 80W−90
*
: See "Model code" on page vi in the
beginning of this manual if you are not
sure of your vehicle model.
Please contact any authorized Toyota
dealer or repairer, or another duly quali-
fied and equipped professional, for further
details.
Dyna100/150_EE
CHASSIS LUBRICATION
Wheel bearings:
2.6 (2.7, 2.3) Lithium base wheel bearing grease,
2.4 (2.5, 2.1) NLGI No.2
Ball joints:
Molybdenum−disulfide lithium base chas-
sis grease, NLGI No.1 or No.2
Propeller shafts:
Lithium base chassis grease, NLGI No.2
BRAKES
Minimum pedal clearance when depressed
with the force of 490 N (50 kgf, 110 lbf)
with the engine running, mm (in.):
Dyna 100
Dyna 150
Pedal free play, mm (in.):
1—6 (0.04—0.24)
Parking brake adjustment when pulled with
the force of 245 N (25 kgf, 55 lbf):
Dyna 100
Dyna 150
Fluid type:
SAE J1703 or FMVSS No.116 DOT 3
*
: See "Model code" on page vi in the
beginning of this manual if you are not
sure of your vehicle model.
STEERING
Wheel free play:
Less than 40 mm (1.6 in.)
Power steering fluid type:
Automatic transmission fluid DEXRONrII
or III
SPECIFICATIONS
*
59 (2.3)
*
51 (2.0)
*
4—6 clicks
*
6—8 clicks
225