Message Reception - Siemens TELEPRINTER 100 Operating Instructions Manual

Table of Contents

Advertisement

End of the message
It is advisable to mark the end of each message by transmitting +++
(three times plus sign). This is aciear indication to the distant station that
amessage has been terminated. It is then advisable to trigger again the
answerback unit of the distant station (key ">!●") after switching to "1 ..."
and then your own answerback unit (key "<^"). This provides acheck whether
or not the connection was in proper condition up to the end of the message.
4 . 2 .
5 .
Message reception
Ateleprinter is also capable of receiving messages in the absence of an
o p e r a t o r .
If you intend to interrupt an incoming transmission for some reason or other
(e. g. in the case of trouble or exhaustion of paper supply) depress any
one key repeatedly (it is advisable to use the key "T"). In the same manner
the distant operator may request you to interrupt your message.
6

Advertisement

Table of Contents
loading

Table of Contents