Table of Contents
Advertisement
Symptom
Cause and/or Corrective Actions
For _ TRV280:
'+The USB dri_ cr has been registered incorrectly as the computer was
The image does not appear on the
connected to your camcorder before the installation of Ihe USB driver
screen of the Windows computer
was completed. Follow the procedure below to install the USB driver
when using Ihe USB cable. _
correclly.
For Windows
98*/Windows
988E/Windows
Me
':_When copying or playing the pictures on a tape using a computer, the
operation is not guaranteed on Window s 98.
1
Check
that your eameorder
is connected
to a computer.
2
right-click
[My Computer],
then click [Properties].
The [System Properties]
screen appears.
3
Click the [Device Manager]
tab.
4
If devices below are already
installed,
right-click
them,
then click [remove]
to delete them.
For copying
and viewing
pictures
recorded
on a
tape
• [USB Audio Device] in the [Sound, video and game
controllers]
folder
• [USB Device] in the [Other devices] lblder
• [USB Composite
Device] in the [Universal
Serial Bus
Controller]
fMder
5
When the [Confirm
Device Removal]
screen appears,
click [OK].
6
Turn
off the power of your camcorder,
disconnect
the
USB cable, then restart
the computer.
7
Place the CD-ROM
in the disc drive of your computer.
8
Follow the steps below and try to install the USB driver
again.
1 Double-click
[My Comimter ].
2 Right-click
[P1CTUREPACKAGE]
(Disc drive)*.
* Drive names (such as (E:)) may val3' depending on the computer.
3 Click [Open].
4 Double-click
[Driver].
5 Double-click
[Semp.exe].
O Note
• Deleting anything other than [USB Audio Dc_ ice], [USB Dc_icc], and
[USB Composite Device] may cause inalfimction of your computer.
88
Troubleshooting
Advertisement
Table of Contents
