Table of Contents
Advertisement
Usingthe
(TAPE
SET)menu- FRAME
REC/
INT.REC,etc.
You can select items listed below in the TAPE
SET menu. To select items, see "Changing
the
menu settings"
(p. 41 ).
The default sett[]gs
are marked with t>. The
settings you can adjust vary depending
on the
power mode of your camcorder. The screen
shows the items you can operate at the moment.
Unavailable items will be grayed out.
t>SP (_
)
Select to record in the SP (StandaM Play) mode on a cassette.
LP ( EP )
Select to increase the recording time from that of the SP mode 12 times
longer for F|t[] TRV 1381338, 1.5times longer for _} TRV28(/) (Long
Play). The use of Sony cassettes is recommended to get the most out
of your camcorder.
0
Notes
• If you record in the LP mode, a mosaic-like noise may appear or sound may bc interrupted
when you play back the tape on other camcorders or VCRs.
• For _|][] TRV 1381338:
When you record a tape in Ihe LP mode on your camcorder, recording is carried out in the
stand ird 8 mm [_ system.
• For DTRV280:
When you mix recordings in the SP mode and in the LP mode on one tape, the pl @)ack
picture may be distorted or the time code may not be written properly between the scenes.
For DTRV280:
1>12BIT
Select to record in the 12-bit mode (2 stereo sounds).
16BIT (a516b)
Select to record in the 16-bit mode l I stereo sound x_ithhigh quality).
For Hi•
TRV 1381338:
You can automatically
adjust the recording
condition
to get the best possible
recording.
When you select [ORC TO SET] in the menu sett[]gs,
[START/STOP
KEY]
appears. Press REC START/STOP.
[ORC] appears on tl_e screen and adjustment
starts. Your camcorder
returns to the standby mode when adjustment
is complete.
It takes about 10 seconds tk)r adjustment.
0
Notes
• Each time you £ject a cassette, this setting x_illbe canceled.
52
Customizing
Your Camcorder
Advertisement
Table of Contents
