Advertisement
At the same time you place the full
|
( w i t h the four-notch hole facing up-
'on the Upper Spindle, thread the
of leader over the Upper Guide
and under lip of Aperture Plate. ee
Side reading ' "Film When On This Spool...
eA i s
facing upward. Thread the film end into,
fee
of the take-up spool and wind the
=
= film around the Spoot clockwise; os ne
: _ Roller, down between the Aperture Plate
and
Pressure Plate, and then around the S
age Indicator will read S (Start
Next, hold back the Pressure Plate with
the oes or es
Rele
your forefinger and carefully push the film _
all the way down until it is properly seated — 2
Hold the empty take-up 'spool so that
With the camera cover off, press the
Trigger or Continuous-run Release and run
off a few inches of film to see if it is mov-
ing properly through the mechanism. Re-
place the cover (place straight down on
a
g lock - ese Z
With he camer
cover Oo
: a the number ee is t the numt
feet Le film vee have eos
Advertisement
