Tascam DA-88 Owner's Manual page 19

5. At the desired punch-in point, hit
RECORD.
The REC FUNCTION indicator
which was blinking will turn on solid.
6. Hit
PLAY
to punch out of record. The tape will resume playing and the REC
FUNCTION indicator will start blinking as before.
REC FUNCTION-triggered punch-in
1. Check to see that all the
REC FUNCTION
indicators are off.
2. Press
INSERT
to»tum on its LED.
3. Locate the tape to a point a few seconds lower than the expected punch-in
point.
4. Hold
RECORD
and press
PLAY
to let the tape start playing in Record Ready
mode.
5. At the desired punch-in point, hit the punch-in track's
REC FUNCTION
switch.
6. At the punch-out point, hit the same
REC FUNCTION
switch again. The
transport will go into Play mode.
Footswitch-triggered punch-in
The optional
RC-30P
footswitch allows you to achieve no-hands punch-in and out.
1. Plug the RC-30P footswitch into the REMOTE PUNCH ON/OUT jack on the
deck's rear.
2. Locate the tape to a point a few seconds lower than the expected punch-in
point.
3. Put the punch-in track into Ready mode by pressing its
REC FUNCTION
switch.
4. Press
INSERT
to let its LED light.
5. Press the
footswitch
to start hearing the track.
6. At the desired moment, press the
footswitch
again to punch the track into
record.
19