Panasonic Omnivision VCRplus+ PV-4611 Operating Instructions Manual page 18

La Copying Your Tapes (Dubbing)
Connections you'll need to make.
Insert a pre-recorded
tape into the Playing
(Source) VCR.
insert a blank tape
with record tab into the
Recording (Editing) VCR.
Select Input "LINE" on the
Recording (Editing) VCR.
(See "Selecting the
Input Mode" at right.)
Push PLAY on Playing VCR.
Push PAUSE at the point you
want to start copying.
Push REC and PLAY at the
Same time on Recording VCR.
Push PAUSE immediately.
Push PAUSE on both
VCRs (at the same time),
to begin copying.
Edit Out Unwanted Parts
of the original recording by using the PAUSE button (on the
Recording unit) while copying is in progress.
Push STOP on both
VCRs to stop copying.
18
To Monitor the Re-Recording
I Turn the TV on and select its VCR channel
(CH3 or CH4) on the Recording VCR.
2 Set the VCR/TV selector on the Recording
VCR to the "VCR" position.
Selecting the Input Mode
] Push MENU to display the
menu.
2 Rotate and push the Wheel]... norare mee,
to select "SET UP VCR". [SET PusH wHeeL
END : PUSH MENU KEY
3 Rotate the Wheel to select
"INPUT SELECT", and
SET UP VCR
then push to choose REPEAT PLAY : ON
TUNER or LINE. l Miana | CINE
* You can also select "LINE"
change in the order shown.
1— 2—3
| (CATV) (TV) |
LINE4——-125 or 69
* When LINE is selected, "L" is
displayed in the Multi Function
Display for about 4 seconds.
Caution:
Unauthorized exchanging and/or copying of copyrighted
recordings may be copyright infringement.