Table of Contents
Advertisement
284
Card Reader Operations
To load the data from the card into the calculator:
Insert side 1 of the magnetic card into the right card reader slot. Allow
the card to pass through the reader.
Display
Crd
Data loaded into primary
storage registers. The
calculator prompts you
that the card contains data
for the secondary registers
as well.
Insert side 2 of the magnetic card into the right card readerslot. Allow
the card to pass through the reader.
Original contents of
X-register again displayed
to indicate that entire card
has been loaded.
Reviewing the registers
verifies that contents of
data card have been load-
ed into the properstorage
registers.
You can see that all the data contained on the magnetic card has been
loaded into the properstorage registers. The data also remains record-
ed on the magnetic card, and can be loaded into the calculator over
and over, until you record other data or a program on that card. Data
(like programs) may be loaded into the calculator from a card in any
order—no matter which side you first pass through the card reader,
the calculatoridentifies it and places the contents in the proper storage
registers of the calculator.
Advertisement
Table of Contents
