Settings - AEG LTR75STEAM User Manual

Touch the button repeatedly to set the
required delay. The time increases by steps
of 30 minutes up to 90' and from 2 hours up
to 20 h.
After touching the Start/Pauze - Départ/
Pause button, the display shows the indicator
and the selected delay time and the
appliance begins the countdown.

9. SETTINGS

9.1 Acoustic signals
To deactivate the acoustic signals when the
programme is completed touch the Anti-
allergie and the Vlek./Voorw. - Taches/Prélav.
buttons simultaneously for about 3 seconds.
The acoustic signals, they continue
operate when the appliance has a
malfunction.
9.2 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option, touch
the Centrifugeren - Essorage and the
Vlek./Voorw. - Taches/Prélav. buttons
simultaneously until the indicator
comes on/goes off on the display.
You can activate this option:
• After you touch the Start/Pauze - Départ/
Pause button: all the buttons and the
programme dial are deactivated (except
Aan/Uit - Marche/Arrêt button ).
• Before you touch the Start/Pauze - Départ/
Pause button: the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
9.3 Permanent Soft Plus
Set the Soft Plus option to optimise the fabric
softener distribution and improve the fabric
softness.
It is suggested when you use the fabric
softener.
20 ENGLISH
8.11 Start/Pauze - Départ/Pause
Touch the Start/Pauze - Départ/Pause button
to start, pause the appliance or interrupt a
running programme.
This option increases slightly the
programme duration.
To activate/deactivate this option touch the
Temp. button and the Centrifugeren -
Essorage button simultaneously until the
indicator comes on/goes off above the
indicator.
9.4 Permanent Extra Rinse
With this option you can permanently have an
extra rinse when you set a new programme.
• To activate/deactivate this option touch
the Vlek./Voorw. - Taches/Prélav. button
and the Spoelen - Rinçage button
simultaneously until the indicator of the
Extra spoelen - Rinçage Plus button
comes on/goes off.
9.5 Operating Hours Counter
It is possible to visualise the total operating
time of the appliance in hours, starting from
the first switching on. This value will count
operating time of the cycles (does not include
pauses, delayed start time). To visualise this
value, proceed as follows:
1. Switch the appliance on by pressing
Aan/Uit - Marche/Arrêt button.
2. Turn the programme knob to the Eco
40-60 programme (1st position
clockwise).
3. Press and hold the Anti-allergie and
Vlek./Voorw. - Taches/Prélav. buttons for
some seconds (within 10 seconds after
the switching on. After these 10 seconds,