Motorola C380 Service Manual page 31

Level 1 and 2 Service Manual
6809485A73-O
4. Carefully separate the LCD/Keypad bezel from the rear endo housing.
Figure 10. Removing the Keypad/LCD Bezel
5. To replace, align the LCD/Keypad bezel to the rear endo housing.
6. Carefully and gently press the front and rear endo housing together until the
latches snap into position.
7. Insert and tighten the 6 screws to a torque setting of 2.0 kgf. Do not overtighten.
8. Replace the endo housing, battery, SIM, and rear housing covers as described
in the procedures.
LCD/Keypad Bezel
May 14, 2004
Disassembly
040288o
31