Panasonic TH-85PB1E Service Manual page 23

Supplement 1: [The check of setting for malfunction of remote pointer]
[1] The check of whether the power is supplied after fitting optical attachment
With the power switch being in "OFF" position, firmly insert the optical
attachment into the electronic pen until it fits in the optical attachment
fixing rim, then slide the power switch to "ON". At this time, check that
the function indicator blink white rapidly and the function indicator goes
off after the power indicator will light up green.
Cautions
If you fit the optical attachment to the electronic pen during power ON
condition, the function indicator will not blink white rapidly and the remote pointer loses the functions.
[2] The check of whether the Touch Pen mode is set to ON in the setting of the display
It can be checked by OSD when the "Recall" button on the remote control is pressed on (Fig. 1) or a Touch Pen mode setting screen (Fig. 2).
Cautions
TOUCH-PEN MODE
Set [TOUCH & REMOTE]. Don't set [TOUCH ONLY].
SLOT INPUT - NETWORK
Set "ON" or "OFF" for each input terminal.
[TOUCH-PEN : ON] is displayed in Touch Pen mode.
The electronic pen cannot be used when VIDEO or COMPONENT input is selected.
The default of Touch Pen mode is OFF.
After carrying out the self check for initializing, or when a A board
is replaced, it is necessary to set Touch Pen mode to ON.
TOUCH-PEN
(Fig.1) OSD of touch pen setting
[3] The check of whether electronic pen is registered into the electronic pen adapter (pairing)
It judges by indicator (Fig. 3) of an electronic pen, and the OSD display at the time of pairing tool soft starting.
Indicators of electronic pen express the existence of the pairing information on an electronic pen adapter, and OSD of pairing
tool software expresses the existence of the pairing information on an electronic pen.
Pairing can be carried out when both pairing information is in agreement.
Indicator of an electronic pen
Power indicator
Off
Green blinking
OSD of pairing tool software
* : Cautions
When all the release is performed with a pairing tool using two or more pen, or when the same pen is being used with two
or more electronic pen adapters, and so on, since pairing may not be made, please check once again whether a character
can be drawn by electronic pen after carrying out pairing.
PC
FULL
NANODORIFT
ON
Function indicator
Alternately blinks green
and red
Off
Optical attachment
TOUCH-PEN SETTINGS
TOUCH-PEN MODE TOUCH & REMOTE
SLOT INPUT
HDMI
DVI
PC
NETWORK
(Fig. 2) Touch pen setting screen
Pairing
NG
OK *
Pairing
(Fig.3)
NG
OK *
23
TH-85PB1E
Optical attachment fixing rim
OFF
OFF
OFF
OFF
OFF
Function
indicator
Power
indicator
Indicator of an
electronic pen