Pioneer KEX-900 Service Manual page 7

KEX-S900/KEX-500
@ KEX-500
; controller
1 (CD-R102)
VOLUME Tuner terminal
UP/DOWN
FF/REW
>t
moe]
pe ae |
AUX terminal
(white short pin} — (black short pin)
Hideaway tuner
Connect to the positive
For memory power terminal of battery
supply (orange)
which supplys current
regardless of ignition
key position
* Always leave short pit in place when tuner termina! and
AUX terminal are not used.
7. PLAYBACK
@ KEX-900
=
COMPUTER CONTHOL EQUALIZER DECK
(Flip-Down Control Panel Section)
supply lead of the clock}
. With the ignition switch in the ON or ACC position, press the open
button @ and the flip-down control pane! will open.
. Insert a cassette tape into the tape slot @. The deck will automatically
set the tape and begin playback.
. Adjust the volume @, balance @, and dual amp balancer @ for
4-speaker systerns) to the desired levels.
. Close the flip-down contro! panel @.
. Press the mode button @ to stop tape transport. Press again to resume
tape transport.
. To remove a tape, press the open/eject button @ and the flip-down
control panel will open. Press the button once more and the cassette
will eject.
The cassette tape will automatically be ejected after a few secords
if it fails to be set. Reinsert the tape and try to set it again.
A loose or warped label on a cassette tape may interfere with the eject
mechanism of the unit or cause the cassette to become jammedin
the unit. Avoid using such tapes or remove such labels from the cis-
sette before attempting use.