Pioneer KEX-900 Service Manual page 5

X-900/KEX-S00
© Blank Skip Display
Lights when the blank skip button is pressed.
© Music Scan Display
Lights when the music scan button is pressed. The music scan function
is in operation while this indicator is lit.
@ Tape Transport/Spectrum Analyzer/Graphic Equalizer
A: Tape Transport Display
B: Spectrum Analyzer Display
Frequency power levels are shown divided among seven frequencies.
Oooc
VOL LOUD
C: Graphic Equalizer Display
awe BS ; i—_—
G.EQ 70S
60 125 250 500 1K 35K 10K VOL LOUD
@ Volume Level/Attenuator Display
Displays the volume level. The indicator at the bottom of the display is
always lit, even when volume is at its minimum setting. Simultaneously
pressing both volume buttons cuts the volume to 1/10 of its current set-
ting {attenuator function) and causes the volume display to flash.
@ Dolby NR Display
OG tights while the Dolby B NR button is pressed, while QC lights while
the Dolby C NR is pressed.
@ External Input Display
Lights when a unit (CD player) connected through the external input con-
nector is in operation while the cassette deck is OFF.
© Loudness Indicator
Appears when the loudness button is pressed to indicate that the loud-
ness function is activated.
@ Frequency Display
Lights while the graphic equalizer display or spectrum analyzer display
is shown.
@ 70 us Tape Display
An automatic tape selector will switch the equalization (70 |4s/120 [s}
when a cassette tape is loaded into the unit. A 70 Us tape will cause
70 [is to be displayed, while a 120 [Us tape will result in no display at all.
@ Graphic Equalizer Display
Lights along with the preset number when an equalizer preset bution is
pressed while the graphic equalizer display is shown.
5. READING THE DISPLAYS (KEX-500)
6 Oo
@ Skip Number Display
Displays the number of selections (set using the command buttons) to
be skipped by the skip search function.
@ Music Search/Skip Search Display
MS appears on the display during music search and skip search operations.
* The display changes as shown during music search:
Ex. Locating the beginning of the current selection.
Set
=> Clear > Tape play
© Blank Skip Display
Lights when the blank skip button is pressed.
@ Music Scan Display
Lights when the music scan button is pressed. The music scan furction
is in operation while this indicator is lit.
@ Tape Transport Display
—moving from the left to the right of the display indicates normal tape
transport. When tape transport is reversed, - moves from right to left.
The respective indicators increase in speed for such functions a: fast
forward, rewind, and music search.
@ Volume Level/Attenuator, Display
Displays the volume level. The indicator at the bottom of the dispay is
always lit, even when volume is at its minimum setting. Simultanepusly
pressing both volume buttons cuts the volume to 1/10 of its currert set-
ting (attenuator function} and causes the volume display to flash.
@ Dolby NR Dispiay
OO will light when the Dolby NR button is pressed.
@ External Input Display
Lights when a unit (CD player) connected through the external inputc on-
nector is in operation while the cassette deck is OFF.
© Loudness Indicator
Appears when the loudness button is pressed to indicate that the o ud-
ness function is activated.
@ 70 us Tape Display
An automatic tape selector will switch the equalization (70 us/12) Hs)
when a cassette tape is loaded into the unit. A 70 us tape will aise
70 us to be displayed, while a 120 us tape will result in no display t all.
|
F
|