Komatsu GALEO WA450-5L Shop Manual page 22

FOREWORD
12
TYPE 3
DISCONNECTION
1. Hold the mouthpiece of the tightening portion and push the
body c in straight until sliding prevention ring b contacts
contact surface a of the hexagonal portion at the male end.
2. Hold in the condition in Step 1, and push until the cover d
contacts contact surface a of the hexagonal portion at the
male end.
3. Hold in the condition in Steps 1 and 2, and pull out the whole
body c to disconnect it.
CONNECTION
1. Hold the mouthpiece of the tightening portion and push the
body c in straight until the slide prevention ring b contacts
surface a of the hexagonal portion at the male end to connect
it.
e
00-10
PUSH PULL COUPLER
00
00
00
WA450-5L WA480-5L