Advertisement
FOREWORD
TYPE 2
DISCONNECTION
1. Hold the mouthpiece of the tightening portion and push body
c in straight until sliding prevention ring b contacts contact
surface a of the hexagonal portion at the male end.
2. Hold in the condition in Step 1, and turn the lever e to the
right - clockwise.
3. Hold in the condition in Steps 1 and 2, and pull out the whole
body c to disconnect it.
CONNECTION
1. Hold the mouthpiece of the tightening portion and push body
c in straight until sliding prevention ring b contacts contact
surface a of the hexagonal portion at the male end to connect
it.
WA450-5L WA480-5L
PUSH PULL COUPLER
00
00
00
e
00-9
Advertisement
