Controls And Indicators - ViewSonic Office Theater PJ1060 User Manual

Controls and Indicators

Projector Control Panel
MUTE button silences
audio output temporarily
RESET button
LAMP indicator
resets selected
becomes lit when
menu option to
lamp cannot light
factory setting
ON indicator
blinks in Standby
mode; remains lit
in Operation mode
TEMP indicator
becomes lit when
temperature inside
projector is too high
Remote control
sensor (rear)
Lens
Lens cap
Cooling fan
(intake)
ViewSonic PJ1060
Remote Control Unit
STANDBY/ON button
powers ON/OFF button.
VIDEO
OFF activates Standby
Mode
STANDBY/ON
ZOOM button
adjusts the size of the
projected picture.
FOCUS button
adjusts the sharpness
of the projected picture.
INPUT button
selects input source:
RGB1 RGB2 VIDEO
MENU
MENU buttons used
to display on-screen
menus and to adjust
MAGNIFY
the selected option.
FREEZE displays a
P in P
still picture, stopping
audio and moving
BLANK
video image
MAGNIFY buttons
magnify part of
FOCUS
projected picture
OFF button turns OFF the
MAGNIFY function (+/-)
BLANK button displays
blank screen (white, blue,
or black). See page 10.
FOCUS button
adjusts the sharpness
of the projected picture.
Speakers
Cooling fan
(exhaust)
Handle
VIDEO button and RGB button
These two buttons are used to
select either Video or RGB
(computer) as the input source.
NOTE: Same function as INPUT
button on Projector Control Panel
LASER button toggles laser-pointer
RGB
LASER
On/Off. See CAUTION below.
POSITION
POSITION button After
pressing this button, move
the DISK PAD (up/down,
left/right) to move screen
image (only for RGB signal)
DISK PAD
• When a menu screen is
displayed, use DISK PAD to
select or adjust a menu item.
• When menu is not displayed, and
RESET
mouse cables are connected, the
DISK PAD functions as a mouse.
Press center of DISKPAD for left-
FREEZE
click mouse function.
• After pressing POSITION button,
VOLUME
DISK PAD moves entire screen
OFF
image.
RESET / "RIGHT " MOUSE button
MUTE
(two functions)
• RESET button: when a menu is
AUTO TIMER
displayed, returns selected
menu option to factory setting.
• "RIGHT" MOUSE button: when
no menu is displayed
ZOOM
VOLUME buttons adjust loudness
of audio output
MUTE button silences
audio output temporarily
TIMER button activates on-screen
countdown timer
ZOOM buttons are used to adjust
the size of the screen image
AUTO button automatically adjusts
Vertical Position, Horizontal
Position, Horizontal Phase, and
Horizontal Size.
Back View of Remote Control Unit
Battery
Compartment
CAUTION
To prevent possible eye damage:
• DO NOT look directly at the laser light
emitted from the Laser Aperture of the
Remote Control Unit (see above).
• DO NOT point the laser light at any
person's eyes.
E
N
G
L
I
S
H
Laser
Aperture
Operation
7