Candy RPD 4106BWMBC-S Manual page 75

l
The steam function relaxes the folds and
makes ironing times shorter.
l
Fibres are regenerated and refreshed,
removing all smells from the items.
l
A dedicated steam treatment was devised
for each programme,
washing top efficiency depending on item
fabrics and colours.
If an option is selected that is not
compatible with
programme then the option indicator
light first flashes and then goes off.
SPECIAL PROGRAMMES button
This button allows you to choose between
three different options (available for some
programmes only):
- STEAM HYGIENE PLUS
Thanks to STEAM HYGIENE PLUS, the
machine is able to reach a temperature of
60°C for an extended period of time,
combining the steam action with a powerful
rinsing action for thoroughly clean and
hygienic laundry. Recommended for cotton
fabrics.
- NIGHT WASH
l
This option reduces the intermediate spin
speed to 400 rpm, where applicable,
increase the water level during rinsing
and keep the laundry immersed in water
after the final rinse, in order to spread the
fiber perfectly.
l
During the drum water retention phase,
the machine is in pause mode.
l
Press PLAY to end the cycle with the
spin (which can be reduced or removed
with the specific button) and drain phase.
l
Thanks to electronic control, the water in
the intermediate
silently, making this option very useful for
washing at night.
to guarantee
the selected
phases is emptied
- DRUM CLEAN
l
Developed to clean the washing machine
drum.
l
Use only powder detergent.
l
Do not start the programme with laundry
in the washing machine.
l
It is suggested that this is carried out after
every 50 washing cycles.
l
The option can only be selected for the
DRAIN & SPIN programme.
These options
before pressing
button.
If an option is selected that is not
compatible
programme then the option indicator
light first flashes and then goes off.
TEMPERATURE SELECTION
button
l
This button allows you to change the
temperature of the wash cycles.
l
It is not possible to raise the temperature
over the maximum allowed for the
programme, in order to protect the fabrics.
l
If you want carry out a cold wash all the
indicators must be off.
SPIN SELECTION button
l
By pressing this button, it is possible to
reduce the maximum speed, and if you
wish, the spin cycle can be cancelled.
l
If the label does not indicate specific
information, it is possible to use the
maximum spin expected in the program.
To prevent damage to the fabrics, it is
not possible to increase the speed
over the maximum allowed for the
programme.
74
must be selected
the PLAY/PAUSE
with the selected