Sony ICF-990L Service Manual page 7

SECTION 2
DIAL POINTER FITTING
Note : Follow the dial pointer fitting procedure in the numerical over given.
1. INSTALL DRUM(1 )
drum (B)
Rotate the drum (B) in arrow @) direction
while inserting it into the drum (A) as
shown tn the figure,
drum (A)
2. INSTALL DRUM(2)
@ Confirm that the drum hole is not dislocated.
@® Adjusting the position as shown, attach the drum to the CV1.
@ screw(+B2.6x5)
1) Turn fully the CV1 toward arrow @®
3. INSTALL DRUM SPRING
drum spring