Table of Contents
Advertisement
When
using non DK-coded
film or when
you want to set the effective speed of a film
determined from your own tests, you can
manually set the film speed to any value
from ISO 6-6400 in 1/3-step increments,
The setting is canceled after the film is re-
moved
and
replaced
with another
DK-
coded film
1) Set the command dial to ISO. "ISO" and
a film speed appear in the LCD panel
2) Turn the electronic input dial to set the
desired film speed.
1. Comparisons Between AF Mode and Film Wind Mode
Film wind mode
One-shot
Al Servo
AF lock and AE lock in the
AF follows the subject and
evaluative metering mode
the exposure is determined at
Single
take place simultaneously on
| the moment of shutter
g!
AF completion. The shutter
release. The shutter
releases only after AF com- | releases only after AF com-
pletion.
pletion.
AF follows the subject and
AF lock and AE Jock inme | tpe pona
fe termined at
KASI E
on
release. AF is adjusted to fol-
Continuous
AF
P
YA
low the subject during the
completion, then continu-
Series of exposure:
ous exposure is activated.
(Approx.
1 is m aximum.)
(Approx; 1 fps maximum)
The shutter releases only
after AF completion.
47
Advertisement
Table of Contents
