Table of Contents
Advertisement
Use exposure compensation for intention-
ally underexposed
or overexposed
pic-
tures. The compensation
range is up to
+/—
2 stops in half-stop increments.
While pressing the exposure compensation
button, turn the electronic input dial until
the exposure level mark is set to the
desired exposure compensation amount.
* Exposure compensation remains ac-
tive until canceled.
e To cancel exposure compensation,
repeat the above procedure to return
the value to 0, or set the command dial
to the green zone or to any of the P.I.C.
modes.
e When
used
in the manual
exposure
mode, the metered standard value is
also compensated.
42
Try this function for creative and dramatic
effects. Up to nine exposures can be made
on the same frame with minimal operation.
1) Press the exposure compensation but-
ton and the partial metering button
together to display "ME"
in the LCD
panel.
2) Turn the electronic input dial to set the
desired number of exposures.
3) Press the shutter button to start.
e "ME"
blinks in the LCD panel during
multiple exposure operation.
e The film winds to the next frame after
the set number of exposures have been
taken,
e To clear preset exposures, repeat steps
#1 and 2 to set the number of ex-
posures to 1,
43
Advertisement
Table of Contents
