Sony SLV-D550P Operating Instructions Manual page 88

To cancel the setting
Select "OfP' in step 2.
Notes
• When the playing signal does not contain a signal for the rear speakers the stu-round effects
will be difficult to hear.
• When you activate the sttrround effect, ntm offthe stu-round setting of the connected TV or
amplifier (receiver).
• Make sure that yottr listening position is between and at an equal distance from your
speakers, and that the speakers are located in similar surroundings.
• If you use the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack and set "Dolby
Digital" to "Dolby Digital" or "DTS" to "On" in "AUDIO SETUP" menu (page 65), sound
will come from your speakers but it will not have the sun-ound effect.
• If you activate the surround effect, the sampling frequency is converted to 48kHz, 16bit.
88 Virtual surround setting