Table of Contents
Advertisement
4.5 Connecting the appliance
Connecting the water inlet hose
Connect the water inlet hose.
1.
Connect the water inlet hose to a
2.
tap (26.4 mm = 3/4").
Open the water tap carefully and
3.
check that the connection points
are tight.
Water outlet connection types
This information is intended to help
you to connect this appliance to the
water outlet.
ATTENTION!
When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.
Secure the water outlet hose
▶
against unintentional loosening.
Installation and connection en
Note: Observe the draining heights.
The maximum draining height is
100 cm.
Siphon
Sink
Plastic pipe with
rubber sleeve or
gully
Connecting the appliance to the
electricity supply
Note: Your electrical domestic install-
ation for this appliance must comply
with the local legal provisions and
safety regulations, and should in-
clude a residual current circuit-
breaker.
Insert the mains plug of the appli-
1.
ance's power cable in a socket
nearby.
The connection details of the appli-
ance can be found under Tech-
nical data → Page 49.
Check the mains plug is inserted
2.
properly.
Secure the con-
nection point with
a (24–40 mm)
hose clamp.
Fix and secure
the water outlet
hose with an el-
bow.
→ "Accessories",
Page 28
Fix and secure
the water outlet
hose with an el-
bow.
→ "Accessories",
Page 28
15
Advertisement
Table of Contents
