Bosch GOP18V-34 Operating/Safety Instructions Manual page 15

Accessory
OSL200CR
OSL350SPD
Selecting Sanding / Grinding Sheets
Material
All wooden materials (e.g.,
hardwood, softwood, chipboard,
building board) Metal materials–
Metal materials, fiberglass
and plastics
Sand Paper (Red)
Paint, varnish, filling compound
and filler
Sand Paper (White)
16099221RZ_GOP18V-34_202303.indd 15 16099221RZ_GOP18V-34_202303.indd 15
S A N D I N G
CG
- Wood
sanding
- Paint
finger
Sanding
backing
- Depends on sanding sheet
pad, series
Delta 3.5"
HCS - High Carbon Steel; BIM - Bi-Metal; CG - Carbide Grit.
For coarse-sanding, e.g. of
rough, unplanned beams and
boards
For face sanding and planing
small irregularities
For finish and fine sanding of
wood
For sanding off paint
For sanding primer (e.g., for
removing brush dashes, drops
of paint and paint run)
For final sanding of primers
before coating
Material
Sanding wood or paint in hard
to reach areas without sanding
paper; example: sanding off
paint between shutter louvers,
sanding wooden floors in
corners.
Sanding surfaces close to edges,
in corners or hard to reach
areas; depending on the sanding
sheet for, e.g., sanding wood,
paint, varnish, stone. Fleeces for
cleaning and for texturing wood,
removing rust from metal and for
keying varnishes, polishing felt
for prepolishing.
Application
-15-
Application
Grit Size
Coarse 40/60
Medium 80/120
Fine 180/240
Coarse 40/60
Medium 80/120
Fine 180/240
3/17/2023 8:21:54 AM 3/17/2023 8:21:54 AM