Yamaha MT-10 2020 Owner's Manual page 34

Instrument and control functions
Multi-function display
1
1
2
3
4
5
1. Multi-function display
The multi-function display is equipped
6
with the following:

an odometer (which shows the to-
7
tal distance traveled.)

two tripmeters (which show the
8
distance traveled since they were
last reset)

a fuel reserve tripmeter (which
9
shows the distance traveled since
the last segment of the fuel meter
10
started flashing)

an instantaneous fuel consump-
11
tion display

an average fuel consumption dis-
play
12

a display brightness and shift indi-
cator light control display
TIP

The odometer will lock at 999999.

The tripmeters reset and continue
counting after 9999.9 is reached.
1
1. Select switch "SELECT"
Push the select switch "SELECT" for
one second to switch the display be-
tween the odometer mode "ODO", trip-
meter modes "TRIP 1" and "TRIP 2",
instantaneous fuel consumption mode
"km/L", "L/100 km" or "MPG", average
fuel consumption mode "AVE – –.–
km/L", "AVE – –.– L/100 km" or "AVE –
–.– MPG" in the following order:
ODO  TRIP 1  TRIP 2  km/L,
5-11
L/100 km or MPG  AVE – –.– km/L,
AVE – –.– L/100 km or AVE – –.– MPG
 ODO
TIP
The fuel reserve tripmeter comes on
automatically.
If the last segment of the fuel meter
starts flashing, the display automatical-
ly changes to the fuel reserve tripmeter
mode "TRIP F" and starts counting the
distance traveled from that point. In this
case, push the "SELECT" switch to
switch the display in the following order:
TRIP F  km/L, L/100 km or MPG 
AVE – –.– km/L, AVE – –.– L/100 km or
AVE – –.– MPG  ODO  TRIP 1 
TRIP 2  TRIP F
TIP

To reset a tripmeter, select it by
pushing the "SELECT" switch, and
then push the "RESET" button for
two seconds.

If you do not reset the fuel reserve
tripmeter manually, it resets auto-
matically and disappears after re-